Yamato Sewing Machine Mfg. Co., Ltd.

Products

Automatic Thread Chain and Tape CutterMT, PT & MU device

CZ_MT22@3x-80.jpg

MT, PT & MU devices are Automatic Cutter of Thread Chains & Tapes

  • MT22: Solenoid Type Tape/Thread Chain Cutter
  • PT2: Air-operated Tape/Thread Chain Cutter
  • MU45: Solenoid Type Automatic Tape/Thread Chain Cutter at Beginning and End of Sewing, with Thread Tension Release
  • MU44: Solenoid Type Automatic Tape/Thread Chain Cutter at Beginning and End of Sewing

MT22

Solenoid Type Tape/Thread Chain Cutter

CZ_MT22@3x-80.jpg

MT22 cuts reinforcing tapes, piping tapes and/or thick thread chains quickly and neatly at your desired point in sewing processes to improve productivity.

PT2

Air-operated Tape/Thread Chain Cutter

PT2 cuts reinforcing tapes, piping tapes and/or thick thread chains quickly and neatly at your desired point in sewing processes to improve productivity.

Air-operated type.

 

Applicable for: AZR8920

MU44 & MU45

MU44: Solenoid Type Automatic Tape/Thread Chain Cutter at Beginning and End of Sewing & MU45: Solenoid Type Automatic Tape/Thread Chain Cutter at Beginning and End of Sewing, with Thread Tension Releaser

MU44 & MU45 are Solenoid Type Automatic Tape & Thread Chain Cutter at the Beginning and the End of Sewing.  In addition to MU44, MU45 equip the Thread Tension Releaser to make extremely soft thread chains, easy to be cut and hard to be unraveled.

 

Opetation

  1. After an operator sets a material and toe down the pedal, the MU device start functioning automatically and cuts the thread chain at the beginning and end of sewing.
  2. The fabric detection switch detects the front and rear edges of the material, and after the thread chain is cut, the cut thread chain is suck in suction pipe. Therefore, operation ef ciency is increased.
  3. By changing values on the control panel, length of a thread chain at the beginning and end of sewing can be changed.
  4. Air blows only at the beginning and end of sewing (by the air saving device), and even if the manual switch is pressed wrongly, the trimming device does not function during sewing (while the material is under the knife).
  5. MU45 device has a thread tension releaser. It makes good seam while sewing and makes a chain easily off after sewing.

Note : MU44 and MU45 need a compressor suctioning the cut thread chain.