Products

Super High Speed Flat Bed Interlock Stitch Machine with Active Thread ControlVF2500-8 series

UT & UT-A

Solenoid Type Under Thread Trimmer & Air-operated Under Thread Trimmer

UTST2.jpg

UT devices are Under Thread Trimmer for Interlock Stitch Machines.

UT device automatically cuts needle threads and looper threads under the fabric at the end of sewing or in the middle of sewing.

After cutting the threads, the wiper pulls up the needle thread over the pressor foot.

 

UT: Solenoid type
UT-A: Air-operated type

ST2 & ST2-A

Solenoid Type Top Cover Thread Trimmer & Air-operated Top Cover Thread Trimmer

VG_ST2-A_Device@3x-80.jpg
ST2-A

ST devices are Top Cover Thread Trimmer for Interlock Stitch Machines.

ST device automatically cuts top cover threads right after a UT device cut the needle threads and looper threads.

ST devices are used combined with a UT device.

 

ST2: Solenoid Type Top Cover Thread Trimmer

ST2-A: Air-operated Top Cover Thread Trimmer

UT & ST device - specifications

  UT-A32 UT-A34 UT-A34 / ST2-A
Operation Air-operated Air-operated Air-operated
Under Thread Trimmer Yes Yes Yes
Foot Lifter Yes Yes Yes
Wiper Yes Yes  
Top Cover Thread Trimmer     Yes
Waste Collection      
Remarks Wiper & foot lifer works at once Wiper & foot lifer works independently No wiper

 

  UT-A42 UT-A44 UT-A44 / ST2-A
Operation Air-operated Air-operated Air-operated
Under Thread Trimmer Yes Yes Yes
Foot Lifter Yes Yes Yes
Wiper Yes Yes  
Top Cover Thread Trimmer     Yes
Waste Collection Yes Yes Yes
Remarks For machines with a left/right hand fabric trimmer
UT-A32 with waste collection function
For machines with a left/right hand fabric trimmer
UT-A34 with waste collection function
For machines with a left/right hand fabric trimmer
UT-A34/ST2-A with waste collection function

 

  UT-2 UT-4 UT4 / ST2
Operation Solenoid type Solenoid type Solenoid type
Under Thread Trimmer Yes Yes Yes
Foot Lifter   Yes Yes
Wiper Yes    
Top Cover Thread Trimmer     Yes
Waste Collection      
Remarks      

 

Applicable models

VG, VGS, VC, VE, VES, VF, VFS series interlock stitch machines

EC

Solenoid type Tape Cutter

VG_EC_Device@3x.png

Semi-automatic solenoid type tape cutter to save labor and material.  

Cutter is actuated by pressing knee switch.  

The device can be swung out when space beneath arm is necesary.

Applicable for: VG2703, VG2779S, VG2779E
Cutting tape width: up to 43 mm

TL1 & TL2

Compact Spot Light

TL1andTL2_Front.jpg
TL1 (Left) & TL2 (Right)

This heat-free, long life compact spot light lightens the needle dropping point and allows operators to see sewing area clearly.  It is convenient when sewing, threading, changing needles and adjusting loopers and so on.


TL1: Fixed type Compact Spot Light
Suitable for threading

TL2: Flexible type Compact Spot Light
Also convenient for threading and adjustments)


Applicable for: All machines

TL devices is compatible 100V to 240V.

ACCU-10

Computerized Accurate Tape Tension Controller

ACCU-10_Front@3x-80.jpg

Be accurate, always. Computerized Accurate Tape Tension Controller Compatible with Any Machines.

As the device always adjust tape feeding amount to be right tension on tape while measuring actual tension, accurate finish can be obtained.

Simple operation to set tensions, models and etc with the intuitive operable control panel. The indicator informs current process and approach of process changing point without forcing operators to turn their head.The device has also capability to control various additional devices like tape cutter.

ACCU-10 can be set on table in many ways to feed tape from top, bottom and side of machine. It can be used along with any kinds of sewing machine used for tape attaching operation.

AEF-31 & AEF-32

Compact Type Clamp System for Automatic Tape Feeder

VG_AEF31_Device&Pole@3x-80.jpg
AEF-31 (Left) & AEF-32 (Right)

This device supplies tape into the machine without any tension.  Tape feeding amount is adjustable to meet various kinds of tape with different elasticity. Clamp system is introduced for easy installation on machine table and relocation to other machines.

Compact Type Clamp System for Automatic Tape Feeder for overlock machines for shoulder joining operations and interlock stitch machines for lace / elastic attachment operations.

This device supplies tape into the machine without any tension.  

Compact design.  Clamp system is introduced for easy installation on machine table and relocation to other machines.  Height and position of the device can easily be adjusted so this device can be fitted to any machines.

Tape feeding amount is adjustable to meet various kinds of tape with different elasticity.

AEF-32_Machine@3x-80.jpg
AEF-32

AEF-31
Compact Type Clamp System Automatic Tape Feeder
Tape-feeding amount can be adjusted freely by thumbscrew. Max. tape width: 100 mm

Designed for supplying tapes from the top of the machine.

Applicable for: every machines for tape / lace attaching operations

 

AEF-32
Compact Type Clamp System Automatic Tape Feeder for Piping Tapes
Tape-feeding amount can be adjusted freely by thumbscrew. Max. tape width: 100 mm

Designed for supplying tapes from the right side of the machine.

Applicable for: every machines for tape / lace attaching operations