Products

Super High Speed Multi Module Cylinder Bed Interlock Stitch Machine with Active Thread ControlVG-8 series

Various optional modules contribute to high quality, quick delivery and cost-saving

UTQ

Automatic Under Thread Trimmer with Anti-Unraveling Device

UTQ_Q-Finish_UP@3x.png

Enables you to eliminate tacking process thanks to the unique anti-unraveling technology to avoid seam unravelling from the end.

UTQ device forms an anchor by needle thread at the end of 2/3 needle coverstitch and 401 stitch, in order to avoid seam unravelling from the end.

Introduction of "Q-finish" to your garments enables elimination of tacking operation done by single needle lock stitch and bar-tacker.

Factories can be benefitted by elimination of an operation, and consmer will enjoy better appearance, function and comfort!
 

Major Features & Benefits

  • World's only working anti-unravel device avoiding seam unravelling from the end
  • Increase productivity, better looking and more comfortable to wear thanks to elimination tacking process
  • Survived severe washing, and extension tests both in-house and by outside testing lab

UTQ & ST devices - specifications

  UTQ-A34 UTQ-A34/ST2-A
Operation Air operated type Solenoid type
Under Thread Trimmer Yes Yes
Foot Lifter Yes Yes
Wiper Yes Yes
Top Cover Thread Trimmer   Yes
Waste Collection    
Remarks

With anti-unraveling function
Wiper & foot lifer works independently

With anti-unraveling function
Wiper & foot lifer works independently

 

  UTQ-A44 UTQ-A44/ST2-A
Operation Air operated type Solenoid type
Under Thread Trimmer Yes Yes
Foot Lifter Yes Yes
Wiper Yes Yes
Top Cover Thread Trimmer   Yes
Waste Collection Yes Yes
Remarks

With anti-unraveling function
For machines with a left/right hand fabric trimmer
UTQ-A34 with waste collection function

With anti-unraveling function
For machines with a left/right hand fabric trimmer
UTQ-A34 with waste collection function

UT & UT-A

Solenoid Type Under Thread Trimmer & Air-operated Under Thread Trimmer

UTST2.jpg

UT devices are Under Thread Trimmer for Interlock Stitch Machines.

UT device automatically cuts needle threads and looper threads under the fabric at the end of sewing or in the middle of sewing.

After cutting the threads, the wiper pulls up the needle thread over the pressor foot.

 

UT: Solenoid type
UT-A: Air-operated type

ST2 & ST2-A

Solenoid Type Top Cover Thread Trimmer & Air-operated Top Cover Thread Trimmer

VG_ST2-A_Device@3x-80.jpg
ST2-A

ST devices are Top Cover Thread Trimmer for Interlock Stitch Machines.

ST device automatically cuts top cover threads right after a UT device cut the needle threads and looper threads.

ST devices are used combined with a UT device.

 

ST2: Solenoid Type Top Cover Thread Trimmer

ST2-A: Air-operated Top Cover Thread Trimmer

UT & ST device - specifications

  UT-A32 UT-A34 UT-A34 / ST2-A
Operation Air-operated Air-operated Air-operated
Under Thread Trimmer Yes Yes Yes
Foot Lifter Yes Yes Yes
Wiper Yes Yes  
Top Cover Thread Trimmer     Yes
Waste Collection      
Remarks Wiper & foot lifer works at once Wiper & foot lifer works independently No wiper

 

  UT-A42 UT-A44 UT-A44 / ST2-A
Operation Air-operated Air-operated Air-operated
Under Thread Trimmer Yes Yes Yes
Foot Lifter Yes Yes Yes
Wiper Yes Yes  
Top Cover Thread Trimmer     Yes
Waste Collection Yes Yes Yes
Remarks For machines with a left/right hand fabric trimmer
UT-A32 with waste collection function
For machines with a left/right hand fabric trimmer
UT-A34 with waste collection function
For machines with a left/right hand fabric trimmer
UT-A34/ST2-A with waste collection function

 

  UT-2 UT-4 UT4 / ST2
Operation Solenoid type Solenoid type Solenoid type
Under Thread Trimmer Yes Yes Yes
Foot Lifter   Yes Yes
Wiper Yes    
Top Cover Thread Trimmer     Yes
Waste Collection      
Remarks      

 

Applicable models

VG, VGS, VC, VE, VES, VF, VFS series interlock stitch machines

CS

Condense Stitch Mechanism

VG_CS_Device@3x-80.jpg

This device makes condensed stitch to prevent unravelling of seam from end.

 

Applicable machines

VG, VGS, VE, VES series

 

  • CS devices should be specified when ordering the machine.
  • A servo motor with control function is necessary to contro CS devices.

P & PR

Puller Mechanism

VG_P&PR_Full@3x.png

P: Tooth Puller

PR: Flat Rubber Rollers

 

  • Puller mechanism and type of rollers should be specified when ordering the machine.

AS4

Air-operated Folder Slider

VC3845P_AS4@0,5x.jpg

AS device is an Air-operated Folder Slider.  AS device controls open / close of folder for easy loading of material and smooth overlapping at the end of circular sewing.

Slider is actuated by the air toggle switch.

 

Applicable for: VC2845P, VC3845P, VG2745P, VG2742P

EC

Solenoid type Tape Cutter

VG_EC_Device@3x.png

Semi-automatic solenoid type tape cutter to save labor and material.  

Cutter is actuated by pressing knee switch.  

The device can be swung out when space beneath arm is necesary.

Applicable for: VG2703, VG2779S, VG2779E
Cutting tape width: up to 43 mm

WF1

Walking Pressor Foot for Hemming

VG_WF1@3x-80.jpg

Designed to move back and forth in cooperation with feed dogs with minimum pressure, and helps feeding upper ply of hem.

No need to give unnecessary pressure, which causes twist and ply shift, even for high speed operation.

 

Applicable machines: VG2700, VG2730, VG2740, VG3721

VG_WF1_Outcome_Full@3x.png
Effective against twists and ply shifts

TL1 & TL2

Compact Spot Light

TL1andTL2_Front.jpg
TL1 (Left) & TL2 (Right)

This heat-free, long life compact spot light lightens the needle dropping point and allows operators to see sewing area clearly.  It is convenient when sewing, threading, changing needles and adjusting loopers and so on.


TL1: Fixed type Compact Spot Light
Suitable for threading

TL2: Flexible type Compact Spot Light
Also convenient for threading and adjustments)


Applicable for: All machines

TL devices is compatible 100V to 240V.

EL1

See Through Light for Hemming

VG_EL1@3x-80.jpg

This heat-free, long life light is installed in front of sewing cylinder and lightens the sewn fabric from the bottom.

Operators can easily see the edge of folded fabrics and make sure the edge is in the correct position.


Applicable Models:

VG, VC-G, CC, VC1700

SC25

Blow-in and Suction Type Self Cleaning System

VG_SC25_Device@3x-80.jpg
VG2790

For easy maintenance and good working environment.

This device blows lint inside sewing cylinder and collects (sucks) it thus decreasing downtime for cleaning.  Therefore, there is no need worry about stains on fabric caused by oil-stained lint.

 

  • Applicable for VG2790 and VGS2790 class only.
  • This device should be specified when ordering the machine.
  • This device requires compressed air or vacuum dust collector for suction of blown lint.
     

VGS_SC25@3x-80.jpg
VGS2790

WF2

Walking Pressor Foot for Covering

VG_WF2_Device@3x-80.jpg

WF2 is a Walking Pressor Foot for Covering to prevent track on foot.

Designed to move back and forth in co-operation with minimum pressure and help positive feeding performance.

No need to give unnecessary pressure, which causes track of foot on dark colored fabric.

Also, the guiding chip installed in front of the pressor foot, which also moves back and forth, keeps joining line of overlock at the correct position.

 

Applicable for VG2713 and VG2790

VG_WF2_Outcome_wFrame@3x.png
Prevents track of foot on dark colored fabric.

ACCU-10

Computerized Accurate Tape Tension Controller

ACCU-10_Front@3x-80.jpg

Be accurate, always. Computerized Accurate Tape Tension Controller Compatible with Any Machines.

As the device always adjust tape feeding amount to be right tension on tape while measuring actual tension, accurate finish can be obtained.

Simple operation to set tensions, models and etc with the intuitive operable control panel. The indicator informs current process and approach of process changing point without forcing operators to turn their head.The device has also capability to control various additional devices like tape cutter.

ACCU-10 can be set on table in many ways to feed tape from top, bottom and side of machine. It can be used along with any kinds of sewing machine used for tape attaching operation.

AEF-31 & AEF-32

Compact Type Clamp System for Automatic Tape Feeder

VG_AEF31_Device&Pole@3x-80.jpg
AEF-31 (Left) & AEF-32 (Right)

This device supplies tape into the machine without any tension.  Tape feeding amount is adjustable to meet various kinds of tape with different elasticity. Clamp system is introduced for easy installation on machine table and relocation to other machines.

Compact Type Clamp System for Automatic Tape Feeder for overlock machines for shoulder joining operations and interlock stitch machines for lace / elastic attachment operations.

This device supplies tape into the machine without any tension.  

Compact design.  Clamp system is introduced for easy installation on machine table and relocation to other machines.  Height and position of the device can easily be adjusted so this device can be fitted to any machines.

Tape feeding amount is adjustable to meet various kinds of tape with different elasticity.

AEF-32_Machine@3x-80.jpg
AEF-32

AEF-31
Compact Type Clamp System Automatic Tape Feeder
Tape-feeding amount can be adjusted freely by thumbscrew. Max. tape width: 100 mm

Designed for supplying tapes from the top of the machine.

Applicable for: every machines for tape / lace attaching operations

 

AEF-32
Compact Type Clamp System Automatic Tape Feeder for Piping Tapes
Tape-feeding amount can be adjusted freely by thumbscrew. Max. tape width: 100 mm

Designed for supplying tapes from the right side of the machine.

Applicable for: every machines for tape / lace attaching operations

UN3

Air-operated fabric uncurler for Interlock machines

An unique labor-saving device which blows air over the fabric to uncurl fabric's edge.

UN3 is for VG series interlock machines with left hand fabric trimmer.

WF8

Walking Pressor Foot for 1 Needle Double Chain Stitch for Top Stitching of Display Tapes

VG2708-WF8_Machine@3x-80.jpg

WF8 is a walking pressor foot with a guiding groove for tapes.

It ensures a neat, pucker-free finish when making top stitching on display tapes, consealing overlock seaming on the neckline of T-shirts.

 

Applicable for VG2708-8

VG2708-WF8_App&Seam@3x.png

WF7

Walking Pressor Foot for 1 Needle Double Chain Stitch

WF7 is a walking pressor foot without a guiding groove for tapes.

 

Applicable for VG2708-8