Product Guide


THREAD EYELETS
Unique thread eyelet for non-tangle and smooth feeding.

back


NEEDLE THREAD
Tension can be adjusted individually to produce beautiful seaming.

back


LONG CYLINDER
Long cylinder of 200mm before needle drop point gives a wide operation space.

back


EASY ADJUSTMENT OF DIFFRENTIAL FEED AMOUNT
back


LOOPER ADJUSTMENT

 Accompanied with changing needle size, adjustable with only one offset Box wrench.

back


OIL FILTER

 Dust in oil can be shut out. And also unique design for easy installation of pump.

back


SMALL SYLINDER

 Cylinder circumference at the needle drop point is 148mm. The small cylinder enables to sew small tubular material.

back


PRESSER FOOT LIFT

 For inserting a material smooth and stabilizing lap of fabric edge, presser foot can be lifted up to 8mm.

back


FD-62-01MR/FD-62-01MS
4 Needle Flat Seamer.
Features: Equipped with Spreader. Cut one side fabric edge.
Advantages: Closing sleeves of T-shuts or the like Crotch seam on brief, shirts, and medium weight fabrics.
standard: cut left side fabric edge.
option: cut right side fabric edge.

back



FD-62-06MR
4 Needle Both Cut Flat Seamer.
Features: Equipped with Spreader and Both-Cutter.
Advantages: Smooth sewing uneven portion such as crotch seam on brief by means of the step on Stitch Plate is 1mm and longer distance from needle drop point to cutting position

back



FD-62-07MS
4 Needle Both Cut Flat Seamer.
Features: Equipped with Spreader and Both-Cutter.
Applications: Especially for light weight material.
Advantages: Smoothly sewing lighter fabric with using New Lap Former and pitch of Feed Dogs is coarse.

back



FD-62-03MR/FD-62-03MS
4 Needle Flat Seamer For Inserting Tape.
Features: Without spreader. Cut one side fabric edge.
Advantages: Attaching tape on front opening of brief, under long pants and so on.
Finish width of tape: 10mm

back



FD-62-12MR / FD-62-12MS
/ FD-62-12HR / FD-62-12HS
"New" 4 Needle Both Cut Flat Seamer.

 New developed mechanism and new designed sewing parts enable this machine to make positive feeding to make smooth operation even on different thick portion. 2 different type is available according to material to be sewn
FD-62-12MR / MS: For light weight - medium weight material such as shoulder joining of t-shirts etc.
FD-62-12HR / HS: For medium heavy weight - heavy weight material such as crotch seam of men's briefs etc.
Needle distance: MR / HR: 5.2 mm
MS / HS: 6.0 mm

back