日本語 
中文 Flat Bed Interlock Stitch Machine with Active Thread Control & Top FeederVFS2500-8 series
UT & UT-A
Solenoid Type Under Thread Trimmer & Air-operated Under Thread Trimmer
UT devices are Under Thread Trimmer for Interlock Stitch Machines.
UT device automatically cuts needle threads and looper threads under the fabric at the end of sewing or in the middle of sewing.
After cutting the threads, the wiper pulls up the needle thread over the pressor foot.
UT: Solenoid type
UT-A: Air-operated type
ST2 & ST2-A
Solenoid Type Top Cover Thread Trimmer & Air-operated Top Cover Thread Trimmer
ST devices are Top Cover Thread Trimmer for Interlock Stitch Machines.
ST device automatically cuts top cover threads right after a UT device cut the needle threads and looper threads.
ST devices are used combined with a UT device.
ST2: Solenoid Type Top Cover Thread Trimmer
ST2-A: Air-operated Top Cover Thread Trimmer
UT & ST device - specifications
| UT-A32 | UT-A34F | UT-A34F / ST2-A | |
|---|---|---|---|
| Operation | Air-operated | Air-operated | Air-operated |
| Under Thread Trimmer | Yes | Yes | Yes |
| Foot Lifter | Yes | Yes | Yes |
| Wiper | Yes | Yes | |
| Top Cover Thread Trimmer | Yes | ||
| Waste Collection | |||
| Remarks | Wiper & foot lifer works at once | Wiper & foot lifer works independently | No wiper |
| UT-A42 | UT-A44F | UT-A44F / ST2-A | |
|---|---|---|---|
| Operation | Air-operated | Air-operated | Air-operated |
| Under Thread Trimmer | Yes | Yes | Yes |
| Foot Lifter | Yes | Yes | Yes |
| Wiper | Yes | Yes | |
| Top Cover Thread Trimmer | Yes | ||
| Waste Collection | Yes | Yes | Yes |
| Remarks | For machines with a left/right hand fabric trimmer UT-A32 with waste collection function |
For machines with a left/right hand fabric trimmer UT-A34 with waste collection function |
For machines with a left/right hand fabric trimmer UT-A34/ST2-A with waste collection function |
| UT-2 | UT-4 | UT4 / ST2 | |
|---|---|---|---|
| Operation | Solenoid type | Solenoid type | Solenoid type |
| Under Thread Trimmer | Yes | Yes | Yes |
| Foot Lifter | Yes | Yes | |
| Wiper | Yes | ||
| Top Cover Thread Trimmer | Yes | ||
| Waste Collection | |||
| Remarks |
Applicable models
VG, VGS, VC, VE, VES, VF, VFS series interlock stitch machines
EC
Solenoid type Tape Cutter
Semi-automatic solenoid type tape cutter to save labor and material.
Cutter is actuated by pressing knee switch.
The device can be swung out when space beneath arm is necesary.
Applicable for: VG2703, VG2779S, VG2779E
Cutting tape width: up to 43 mm
TL1 & TL2
Compact Spot Light
This heat-free, long life compact spot light lightens the needle dropping point and allows operators to see sewing area clearly. It is convenient when sewing, threading, changing needles and adjusting loopers and so on.
TL1: Fixed type Compact Spot Light
Suitable for threading
TL2: Flexible type Compact Spot Light
Also convenient for threading and adjustments)
Applicable for: All machines
TL devices is compatible 100V to 240V.
ACCU-10
Computerized Accurate Tape Tension Controller
Be accurate, always. Computerized Accurate Tape Tension Controller Compatible with Any Machines.
As the device always adjust tape feeding amount to be right tension on tape while measuring actual tension, accurate finish can be obtained.
Simple operation to set tensions, models and etc with the intuitive operable control panel. The indicator informs current process and approach of process changing point without forcing operators to turn their head.The device has also capability to control various additional devices like tape cutter.
ACCU-10 can be set on table in many ways to feed tape from top, bottom and side of machine. It can be used along with any kinds of sewing machine used for tape attaching operation.
AEF-31 & AEF-32
Compact Type Clamp System for Automatic Tape Feeder
This device supplies tape into the machine without any tension. Tape feeding amount is adjustable to meet various kinds of tape with different elasticity. Clamp system is introduced for easy installation on machine table and relocation to other machines.
Compact Type Clamp System for Automatic Tape Feeder for overlock machines for shoulder joining operations and interlock stitch machines for lace / elastic attachment operations.
This device supplies tape into the machine without any tension.
Compact design. Clamp system is introduced for easy installation on machine table and relocation to other machines. Height and position of the device can easily be adjusted so this device can be fitted to any machines.
Tape feeding amount is adjustable to meet various kinds of tape with different elasticity.
AEF-31
Compact Type Clamp System Automatic Tape Feeder
Tape-feeding amount can be adjusted freely by thumbscrew. Max. tape width: 100 mm
Designed for supplying tapes from the top of the machine.
Applicable for: every machines for tape / lace attaching operations
AEF-32
Compact Type Clamp System Automatic Tape Feeder for Piping Tapes
Tape-feeding amount can be adjusted freely by thumbscrew. Max. tape width: 100 mm
Designed for supplying tapes from the right side of the machine.
Applicable for: every machines for tape / lace attaching operations